Wrap and flash first
House wrap and flashing are the real water barrier. The boards shed most rain, but whatever gets past them has to drain down and out.
Siding warped, faded or soft across the house? Replace it once, with rotted sheathing fixed and the wall wrapped before new boards go on.
Replacement is the right call when repairs keep coming back: swelling along the bottom course on several walls, paint that fails soon after repainting, or boards that flex when pressed. An experienced contractor replaces the siding and fixes what's behind it in the same job.
Age is part of it. Half of the homes in Hillsboro, Oregon were built before 1997, which puts many houses well past 25 years on their original siding, caulk and window flashing.
For repair options and other materials, see the Hillsboro siding contractors overview, or keep reading for what a full replacement includes.
A complete job typically includes:
Ask for each item to appear on the estimate. Sheathing is usually priced as an allowance per sheet, because no one can see it until the old siding comes off.
Call (564) 216-1408
House wrap and flashing are the real water barrier. The boards shed most rain, but whatever gets past them has to drain down and out.
Vinyl needs room to slide on its nails; fiber cement needs gaps at trim and above roof lines. Tight work buckles or wicks water.
Boards should stop above soil, decks and roofing so the lowest edge can dry between storms.
Trim at corners, windows and doors closes the system. Caulk alone at these joints is the first thing to fail.
On an addition, matching the existing profile and reveal keeps the new wall from looking patched on.
The contractor checks every wall for soft spots, stains and open seams, and measures for material.
The estimate lists tear-off, the new material and trim, flashing, and an allowance for sheathing repair.
Old siding comes off one area at a time, and soft sheathing is cut out and replaced.
House wrap goes on shingle-style over window, door and roof-line flashing.
New boards, corner posts and trim go up, and penetrations are blocked out or sealed.
Whole-house siding replacement in Hillsboro, OR typically costs about $7,000 to $30,000, depending on material and size.
Vinyl typically runs about $7,000 to $25,000 and fiber cement about $15,000 to $30,000. Sheathing repairs, a second story, heavy trim and many windows push a job toward the top of the range. These are typical ranges, not quotes.


Soft spots on more than one wall? Price a full replacement.
Whole-house siding replacement typically costs about $7,000 to $30,000. Vinyl typically runs about $7,000 to $25,000 and fiber cement about $15,000 to $30,000.
Replacing siding alone is generally exempt from a building permit under Oregon's residential code, but replacing the sheathing or framing behind it usually needs one. The City of Hillsboro Permitting Center confirms what a specific job needs.
Sometimes. Soft sheathing tends to turn up at bottom edges, under windows and where roofs meet walls; it should be replaced before house wrap goes on and priced as an allowance on the estimate.
Yes, if the material and profile can still be matched. Weathered paint or faded vinyl may not match new boards, so a full wall or a corner-to-corner section usually looks better.
Late spring through early fall is easiest, because walls and sheathing are dry. A winter job can still work if the open wall is covered at the end of every day.
Somewhat. Most of the gain comes from sealing gaps and adding house wrap; insulated vinyl or foam board under the boards adds a little more.
Call (564) 216-1408 to talk with an experienced local contractor about materials, scope and what's likely under the old siding.